Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

WTB TCS Brass 46mm Valve Stems
$22.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Sunlite BB Axle Bolt
$2.49
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
Sunlite BB Axle Nut
$2.49
- Shell: 8mm flanged axle nut - Flanged
Sunlite Quick Release Skewer (Front, 100mm)
$9.99
- Replacement steel quick release skewers
Sunlite Quick Release Skewer (Front, 133mm)
$9.99
• Replacement aluminum quick release skewers
Sunlite Quick Release Skewer (Rear, 161mm)
$9.99
• Replacement aluminum quick release skewers
Sunlite Replacement Q.R. Skewer Nut
$1.99
- Steel end nut for QR skewers
Sunlite Replacement QR Skewer
$9.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
Sunlite Three Speed Sturmey Archer Indicator Spindle
$10.00
Replacement indicator chain for three speed Sturmey Archer hubs.
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Rim Tape
$14.99 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Tubeless Valve Stems
$16.00 - $22.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Sta-Tru 700c Front Wheel
$55.00
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher
Robert Axle Project Front Lightning Bolt-On Thru Axle
$42.00 - $59.99
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Kid Trailer Thru Axle
$58.00 - $65.99
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Rear Lightning Bolt-On Thru Axle
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Giant On-Road Trainer Rear Thru-Axle
$45.00
Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle
DT Swiss Disc Brake Rotor Adaptor Center Lock/6-Bolt
$25.00
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
DT Swiss HG 1800 SPLINE 25 700c Rear
$289.90 - $301.90
The HG 1800 SPLINE 25 combines Swiss precision and noble reserve. On closer inspection of the reliable e-specific components, it is clear that this wheelset won't let you down. Reinforced spokes, e-bike-specific hub components, and a super-durable rim make for a high-quality wheelset at an attractive price point. - Shimano/SRAM 11-speed road cassette-compatible
Zipp 11-speed Freehub Body for 30/60 Wheels
$72.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 30 Course Disc Brake Front Wheel (Clincher)
$445.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 30 Course Disc Brake Rear Wheel (Clincher)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Zipp 3ZERO MOTO 27.5-inch Tubeless Front Rim
$700.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO 29-inch Tubeless Front Rim
$700.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 77/177 Disc Conversion Caps
$17.10 - $28.00
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
Zipp AM Rim Tape
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Zipp Cognition Freehub Kit
$116.30 - $133.00
Freehub bodies for Zipp Cognition hubs.
Page 1 of 21 Next page